getting ready to glue the bottom linings

there is a gap here but the clamps are strong enough to pull it all together

the corner block mortices are checked

again the other side

all the linings are now glued in

the mortices covered in glue, I put glue in the holes before pushing the lining in

after 9 hours I took the clamps off and this one lining has a big gap which I will have to try to improve

the ribs with all the linings installed

using hot glue I pushed it into the gaps and reclamped, it did not do much for the gap but more just filled it up with glue

this one seemed to close a bit

lets hope this works as if it does not I will have to look at another way of doing it